-
Cosul meu
Cosul de cumparaturi contine:Total: 23 Produse258888.63 Lei
Acest kit de prindere M6 CMM poate fi utilizat pentru a susține piesele din alamă, titan, aluminiu, plastic, feroase și neferoase. Acesta include: un set de componente (R-FSC-CC-6), o placă suport de 300 mm x 300 mm cu găuri filetate M6 distanțate la intervale de 12,5 mm (R-PC-13300300-12-6) și o pereche de cleme pentru a monta placa suport pe CMM.
Kitul include:
| Cantitate | COD Produs | Descriere |
| 6 | R-S-910-6 | Ø 9 mm x 10 mm standoff |
| 4 | R-S-1310-6 | Ø 13 mm x 10 mm standoff |
| 8 | R-S-1320-6 | Ø 13 mm x 20 mm standoff |
| 8 | R-S-1325-6 | Ø 13 mm x 25 mm standoff |
| 8 | R-S-1350-6 | Ø 13 mm x 50 mm standoff |
| 4 | R-S-1910-6 | Ø 19 mm x 10 mm standoff |
| 8 | R-S-1920-6 | Ø 19 mm x 20 mm standoff |
| 8 | R-S-1925-6 | Ø 19 mm x 25 mm standoff |
| 8 | R-S-1950-6 | Ø 19 mm x 50 mm standoff |
| 6 | R-S-19100-6 | Ø 19 mm x 100 mm standoff |
| 8 | R-S-2520-6 | Ø 25 mm x 20 mm standoff |
| 8 | R-S-2525-6 | Ø 25 mm x 25 mm standoff |
| 8 | R-S-2550-6 | Ø 25 mm x 50 mm standoff |
| 6 | R-S-25100-6 | Ø 25 mm x 100 mm standoff |
| 4 | R-SP-1325-6 | Ø 13 mm x 25 mm pin standoff |
| 2 | R-SP-1925-6 | Ø 19 mm x 25 mm pin standoff |
| 6 | R-CT-40-30-6 | 40 mm tension clamp with 30 mm post with M6 thread |
| 12 | R-CT-64-70-6 | 64 mm tension clamp with 70 mm post with M6 thread |
| 3 | R-CT-95-83-6 | 95 mm tension clamp with 83 mm post with M6 thread |
| 3 | R-CT-100P-83- 6 |
105 mm tension clamp with 83 mm post and adjustable plunger tip and M6 thread |
| 1 | R-CTB-25-6 | M6 tension clamp bracket for use with Ø25 mm standoffs |
| 6 | R-RCD-6 | Delrin® resting cone with M6 thread |
| 6 | R-RPS-6 | Steel resting pin with M6 thread |
| 1 | R-APJ-6 | Adjustable pivot joint with M6 thread |
| 4 | R-AJ-13-6 | Ø 13 mm adjustable jack stand with M6 thread |
| 3 | R-AJ-25-6 | Ø 25 mm adjustable jack stand with M6 thread |
| 3 | R-AS-45-6 | Ø 45 mm long adjustable slide with M6 thread |
| 4 | R-AS-70-6 | 70 mm long adjustable slide with M6 thread |
| 2 | R-TB-2025-6 | M6 tower block with base 20 mm sq. x 30 mm |
| 1 | R-T-25300-6 | 25 mm2 x 300 mm tower (4 sides, 1 row) with M6 thread |
| 2 | R-TC-500200 | 500 mm x 200 mm x 25 mm component tray to hold M6 and M8 components |
| 2 | R-BC10 | 50 mm x 200 mm x 150 mm compartment box (not shown) |
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce in orci nibh. Quisque fringilla lorem justo, in tristique nibh eleifend in. Donec malesuada accumsan nisi, eu dapibus ex rhoncus vitae. Suspendisse commodo volutpat iaculis. Mauris elementum felis velit, sed ornare erat ultrices sed. Phasellus aliquet aliquam vehicula.
